JYL-B430-XY Industrial Fully Automatic Eyelet Setting Machine for Curtains Pattern Sewing
Product Description
Fully automatic curtain eyelet machine is suitable for eyelets sewing and bartack for caps/hats industry, clothing, luggage, embroidered eyelets, jujube and other similar products.
Main Features
2 ) Use direct drive servo motor, stable speed and efficiency ;
3) Single pressure plate control mode;
4) Electronic winding function; Two feeding methods (thimble positioning and center feeding)
Product Specification
| Model | JYL-B430-XY |
| Working Area: | 40mm*30mm |
| Maximum sewing speed | 2700rpm |
| Stitch : | 0.05-12mm |
| Maximun no.of stitches: | 20000stitches/pattern |
| Work holder method: | Penumatic |
| Medium presser height: | 15mm |
| Motor: | 750W Direct-drive servo motor |
| Applicable needle: | DPx17 DPx5 |
| Power supply: | 220-240V |
| Operation type: | 7.5”LCD Touch panel |
| Size: | 1100*900*1110mm |
Locating principle of powered eyeletting equipment
Eyeleting machine is mainly utilized for belts, uppers, hats, folders, handbags, tags, and all type of leather, metal, using the upper as well as reduced clasp automatic feeding which has high performance, security and so on. What is the concept of locating as well as riveting the eyeleting machine tool? Details are as follows: According to the principle of the oretical technicians, a rigid body in the free state of area has six levels of freedom that is moving along three axes of X.Y.Z and rotating around the three axes. Therefore, to make the things inhabit a specific setting in space, we must get rid of these six degrees of liberty. When the work surface is positioned in the fixture, the six degrees of freedom need to be limited to ensure that the work surface can be properly positioned.A regular method of restricting the level of liberty of the work surface is to set six support pointson the component according to certain rules. Put the work surface flat on the XOZ plane which has three points limit the three level of flexibility(X.Z axisrotation and also motion along the Y axis); after that the work surface near the YOZ plane to have 2 points, restricting one degree of freedom(i.e. along the Zaxis. Mobile). With six supporting points, the 6 degrees of liberty of the work piece are limited to make sure that the position of the work surface in the component is completely identified. This is the concept of the 6 point pass away placing.