Modern sewing machines are wonderful devices that not only make sewing an easier chore to do but have a bunch of features that make them pretty much error-proof. Of course, that is not how it seems to a lot of people. There are quite a few people out there, and maybe you are one of them, that really get tired of their machine acting up in one way or another. If you don’t believe me, then all you have to do is read some of the sewing machine reviews and you’ll see what I am talking about. It seems like there are quite a few machines out there that are rebelling against their users.
It would be easy to blame the machine, but unfortunately it isn’t the machine’s fault—at least nine times out of ten. Most of the common “malfunctions” that crop up during sewing have more to do with user error than a shoddily designed machine. I hate to break it to you but it’s the truth.
Fortunately, it is something that can be remedied. Today, I am going to show you some of the most common sewing machine errors and the best sewing machine remedies for these errors. Fixing these problems as they arise will allow you to solve them quickly and get on with the task at hand.
Problem #1: My Needle Keeps Unthreading
This is the most common problem. You have just threaded your needle and as soon as you start sewing—bam—it comes unthreaded. Fortunately, this is easy to solve. First off, always make sure you have an adequate amount of thread pulled through the needle and out the back of the machine. At least several inches. Second, make sure that your needle is at the highest position possible before you start sewing. You can make sure that the needle is fully raised by checking the top of your sewing machine. If you can see the take-up lever, then the needle is fully raised. If you can’t, then hand crank your machine until you can.
Problem #2: My Fabric Is Hyperactive!
If you are attempting to thread your garment or piece of fabric and it just won’t sit still long enough to finish the task, then you don’t have the presser foot lowered. The presser foot holds down the fabric so you can stitch neatly. If it’s not lowered, your fabric will move with the needle. Don’t let that happen, lower your presser foot.
Problem #3: Uneven Stitching
If you just finished doing a stitch and it looks really loose on one side and really tight on the other side, then you most likely have a tension problem. Check the settings on your machine and make sure that the tension is set correctly. If that still doesn’t fix the problem, then check your bobbin and make sure that it is not only inserted in the machine in the correct way, but that the thread is pulled through those grooves that are in the bobbin case.